Posts tagged ‘ek success’
I’ve created some more “print and punch” designs for the EK Tools Flourish Square Large punch, this time hats with a Father’s Day and Summer Vacation theme. I’ve included a guideline on the portion opposite the hat to help you line up the punch, and you’ll need to finish off each hat with a scissor cut along the dotted line.
Here’s another in my series of “print and punch” designs. You will need the EK Tools Flourish Square Large punch for this. There’s actually a little more than print and punch to this one so I’ve included some extra pictures with steps below.
Print out at 100% size and separate into strips. Center image carefully inside punch shape and punch.
Fold resulting punchout over along the diagonal and cut along the dotted line.
Each punchout yields 2 single-sided hats or 1 double-sided hat. Alternately, glue 2 hats back to back around a toothpick to make a cupcake stake.
My first set of digis to match the EK Tools “Real Estate Sign” Punch was so popular that I decided to share some more. Most are for Mothers Day but a few different takes for Fathers Day, too. I’d love to link to a card you make with one of these, so let me hear from you if you are able to use these.
Download the PDF note: this is an update. Be sure you have “ekresmday2.pdf”
The big name stamping catalogs have all these great rubber and/or acrylic stamps to match punches and vice versa, but what about all those other punches and nesting dies we already have? Surely some artistic folks have put together digistamps to go with those. I mean, with these old school tools you avoid all the print and cut issues inherent with the newer technologies. Just line ‘em up and punch ‘em out. It could hardly be easier. So digital images and templates to match popular punches must be plentiful, right? Umm, no. In fact, I couldn’t find any. Instead I found all kinds of complicated instructions about how to measure and make your own MSWord etc. docs for sentiments. This seems woefully inefficient to my engineer brain, so today I am doing something about it and sharing the files I use with one of my favorite punches, the “Real Estate Sign” from EK Tools. If you own this punch, please download and enjoy this file and let me see what you do with it. If you have punch-coordinating files of your own, I hope you’ll post them and let me know so I can link you up here. And if you are a punch or die manufacturer, you can thank me later.
Update: I did find one other PDF printable to match this punch here.
My tutorial on how to make these is here.